Something went wrong. Please try saving your Job Alert again.
Invalid email address
You can save a maximum of 20 Job Alerts. You will need to delete (or modify) one of your existing Job Alerts.
Job Alert already exists. View Job Alert
Displaying 1-25 of 43 jobs
The position you are looking for is no longer available, but here are some similar jobs that might interest you
Posted today by Ambitek Limited
**THIS ROLE IS LOCATED IN BIRKENHEAD**. Due to new contracts Ambitek are looking to recruit a number of experienced FCAW (Flux Core Welders) to work on a number of shifts in the Merseyside Area. Experienced working in a shipyard would be an advantage as would current coding. Pay Rate £19.22 per … more
Posted today by Ambitek Limited
Our Client, a large engineering company are looking for experienced pipefitters to work in and around the Manchester area. Must be comfortable with ABS Pipework and stainless and carbon steel pipework fabrication. Candidates must be comfortable tacking your own pipework in TIG. Must be comfortable … more
Posted today by Ambitek Limited
Our Client, a large engineering company are looking for experienced pipefitters to work on site in the Trafford Park area. Must be comfortable with ABS Pipework and stainless and carbon steel pipework fabrication. Candidates must be comfortable tacking your own pipework in TIG. Must be comfortable … more
Posted today by Ambitek Limited
Our Client, a large engineering company are looking for an experienced Fabricator to work in the Manchester area. Must be comfortable with ABS Pipework and stainless and carbon steel pipework fabrication. Must be able to read from isometric drawings. Must have CSCS or CCNSG. Rates are: £24.13 basic … more
Posted today by Ambitek Limited
**THIS ROLE IS LOCATED IN BIRKENHEAD**. Due to new contracts Ambitek are looking to recruit a number of experienced FCAW (Flux Core Welders) to work on a number of shifts in the Merseyside Area. Experienced working in a shipyard would be an advantage as would current coding. Pay Rate £19.22 per … more
Posted just now by Ambitek Limited
Ambitek are currently looking to recruit a number of MIG Welders for our client over in Winsford. Work is all MIG welding on mild steel. Working with tolerances up to 20mm. Working hours are:. Monday - Thursday : 07:45 - 16:45. Friday : 07:45 - 12:45. Basic hourly rate £19.85. Overtime £27.03 … more
Posted just now by Ambitek Limited
Ambitek are currently recruiting for skilled structural MIG welders in Winsford. Basic £19.85 / Overtime £27.03 (after 39 hours. Pay is through CIS or Umbrella only. Monday to Thursday 07:45 - 16:45. Friday 07:45 - 12:45. MIG welding of structural beams • End-plates using solid wire MIG in down … more
Posted just now by Ambitek Limited
Ambitek are currently looking to recruit a number of Time Served Platers for our client over in Winsford. You will be working with up to 20mm - 40mm thick plate. Must have experience working within a structural steel background. Working hours are:. Monday - Thursday : 7.45am - 4.45pm. Friday : … more
Posted yesterday by Ambitek Limited
2 x Pipefitters needed for chemical plant in Widnes. 11.6 hours per day. Basic £24.40. OT1 £29.80. OT2 £3600. ** MUST HAVE CCNSG **. Local candidates only please, client not supplying … more
Posted just now by Ambitek Limited
Ambitek are currently looking to recruit a number of Time Served Fabricators for our client over in Winsford. You will be working with up to 20mm - 40mm thick plate. Must have experience working within a structural steel background. Working hours are:. Monday - Thursday : 7.45am - 4.45pm. Friday : … more
Posted today by Ambitek Limited
Ambitek are currently looking to recruit a number of Time Served Platers for our client over in Winsford. You will be working with up to 20mm - 40mm thick plate. Must have experience working within a structural steel background. Working hours are:. Monday - Thursday : 7.45am - 4.45pm. Friday : … more
Posted today by Ambitek Limited
Ambitek are currently looking to recruit a number of Time Served Fabricators for our client over in Winsford. You will be working with up to 20mm - 40mm thick plate. Must have experience working within a structural steel background. Working hours are:. Monday - Thursday : 7.45am - 4.45pm. Friday : … more
Posted today by Ambitek Limited
Ambitek are currently looking to recruit a number of MIG Welders for our client over in Winsford. Work is all MIG welding on mild steel. Working with tolerances up to 20mm. Working hours are:. Monday - Thursday : 07:45 - 16:45. Friday : 07:45 - 12:45. Basic hourly rate £19.85. Overtime £27.03 … more
Posted today by Ambitek Limited
Ambitek are currently recruiting for skilled structural MIG welders in Winsford. Basic £19.85 / Overtime £27.03 (after 39 hours. Pay is through CIS or Umbrella only. Monday to Thursday 07:45 - 16:45. Friday 07:45 - 12:45. MIG welding of structural beams • End-plates using solid wire MIG in down … more
Posted today by Ambitek Limited
Workshop based role then site installation. Pipe fitting and fabricating hygienic jacketed pipe sections. TIG Welding must be a good standard (weld test required. Must be able to fabricate quality pipe sections to isometric drawings and weld sections. Immediate starts after successful trade test. … more
Posted just now by BMSL Group Ltd
CSCS Labourer required on short term basis, two day shifts, Monday 24th June and Tuesday 25th June on site within grounds of college in Nelson (BB9 7YT. Must have previous construction site experience and hold a current CSCS Card. Working hours for the two shifts are 8am to 5pm and hourly rate is … more
Posted just now by Ambitek Limited
Our Client, a large engineering company are looking for experienced pipe welders to work in and around the Liverpool area. Must be comfortable with ABS Pipework and stainless and carbon steel pipework fabrication. Candidates must be comfortable tacking your own pipework in TIG. Must be comfortable … more
Posted just now by BMSL Group Ltd
Electricians Mates required until the end of July initially on site in Preston Town Centre, museum project. Must have a minimum of 3 years on site experience working as an Electricians Mate and hold a current ECS Card. Weekly hours are 40 Monday to Friday and hourly rate is £18.00. Contract starts … more
Posted today by Ambitek Limited
Ambitek are looking for a Mechanical Fitter for a long term contract with our client in Preston. This is a maintenance role, you must have experience with pumps & conveyors inspections and maintenance. **LOCAL CANDIDATES ONLY PLEASE, CLIENT NOT SUPPLYING DIGS**. Must have CCNSG or CSCS. Pay is CIS … more
Posted today by Ambitek Limited
My Client is actively looking for an experienced Engineering Stores Person / Store Keeper. Must have experience with the following. LOLER. PUWER. FLT. PAT TESTING. Replacing brushes on Grinders. Experience from an engineering background is a … more
Posted today by Ambitek Limited
Due to new contracts Ambitek are looking to recruit a number of experienced FCAW (Flux Core Welders) to work on a number of shifts in the Merseyside Area. Experienced working in a shipyard would be an advantage as would current coding. Pay Rate £19.22 per hour PAYE. Time Half Overtime 1. Double … more
Posted today by Ambitek Limited
THIS ROLE IS LOCATED IN CHIRK, TRAVEL / ACCOM / DLA PROVIDED. Mechanical Fitters needed for shutdown in Wrexham, starting 28.05 - 07.06. 11 x 12 hour dayshift Monday to Sunday - Basic £22.32 - OT1 £29.74 - OT2 £38.21. … more
Posted yesterday by Interaction Recruitment
Paint Plant Operative - Afters. Temp to Perm role, £15.85p/hr, Afters Shift, Mon-Fri, 39hrs per week. LEEDS. I am looking for an experienced Paint Plant Operative to work at a busy Manufacturing company based near to Yeadon, Leeds, on the Afters shift. The role will require you to be able to Powder … more
Posted today by Ambitek Limited
Welder / Fabricator needed for shutdown over in Sheffield. Work is scheduled to start 13.06 - 22.06. 10 x 10 hour Dayshifts - Either 07:00-17:00 or 08:00-18:00. MUST HAVE IN DATE CCNSG. Travel allowance (if home is over 35 mile radius from site), accommodation supplied & daily living … more
Posted today by Ambitek Limited
Due to new contracts our client based in Birkenhead are looking to recruit a Maintenance Fitter to work on several projects. Ideally you will be time served and have experience working on large heavy industrial machinery. The work will involve both planned and reactive maintenance. Hours Of Work … more
