Something went wrong. Please try saving your Job Alert again.
Invalid email address
You can save a maximum of 20 Job Alerts. You will need to delete (or modify) one of your existing Job Alerts.
Job Alert already exists. View Job Alert
Displaying 1-25 of 77 jobs
The position you are looking for is no longer available, but here are some similar jobs that might interest you
Posted yesterday by Ambitek Limited
Ambitek are currently looking to recruit a number of Time Served Fabricators for our client over in Winsford. You will be working with up to 20mm - 40mm thick plate. Must have experience working within a structural steel background. Working hours are:. Monday - Thursday : 7.45am - 4.45pm. Friday : … more
Posted 2 days ago by Ambitek Limited
Ambitek are currently looking to recruit a number of Time Served Platers for our client over in Winsford. You will be working with up to 20mm - 40mm thick plate. Must have experience working within a structural steel background. Working hours are:. Monday - Thursday : 7.45am - 4.45pm. Friday : … more
Posted 2 days ago by Ambitek Limited
Ambitek are currently looking to recruit a number of Time Served Fabricators for our client over in Winsford. You will be working with up to 20mm - 40mm thick plate. Must have experience working within a structural steel background. Working hours are:. Monday - Thursday : 7.45am - 4.45pm. Friday : … more
Posted 2 days ago by Ambitek Limited
Ambitek are currently looking to recruit a number of MIG Welders for our client over in Winsford. Work is all MIG welding on mild steel. Working with tolerances up to 20mm. Working hours are:. Monday - Thursday : 07:45 - 16:45. Friday : 07:45 - 12:45. Basic hourly rate £19.85. Overtime £27.03 … more
Posted 2 days ago by Ambitek Limited
Ambitek are currently recruiting for skilled structural MIG welders in Winsford. Basic £19.85 / Overtime £27.03 (after 39 hours. Pay is through CIS or Umbrella only. Monday to Thursday 07:45 - 16:45. Friday 07:45 - 12:45. MIG welding of structural beams • End-plates using solid wire MIG in down … more
Posted by Carrington West
Senior C&I Engineer (Nuclear) - Capenhurst, Cheshire. Contract - 6 months (potential to extend. Up to £65 per hour (Inside IR35. Hybrid (will require site presence in Capenhurst initially, moving to hybrid. You'll be working on Front End Engineering Design (FEED) solutions and diving deep into …
Posted yesterday by Ambitek Limited
Ambitek are currently looking to recruit a number of MIG Welders for our client over in Winsford. Work is all MIG welding on mild steel. Working with tolerances up to 20mm. Working hours are:. Monday - Thursday : 07:45 - 16:45. Friday : 07:45 - 12:45. Basic hourly rate £19.85. Overtime £27.03 … more
Posted yesterday by Ambitek Limited
Ambitek are currently recruiting for skilled structural MIG welders in Winsford. Basic £19.85 / Overtime £27.03 (after 39 hours. Pay is through CIS or Umbrella only. Monday to Thursday 07:45 - 16:45. Friday 07:45 - 12:45. MIG welding of structural beams • End-plates using solid wire MIG in down … more
Posted yesterday by Ambitek Limited
Ambitek are currently looking to recruit a number of Time Served Platers for our client over in Winsford. You will be working with up to 20mm - 40mm thick plate. Must have experience working within a structural steel background. Working hours are:. Monday - Thursday : 7.45am - 4.45pm. Friday : … more
Posted 28/05/2024 by NRL Recruitment
I have some excited to annouce I have some amazing opportunities to work within the nuclear industry for any Project Managers & Project Engineers looking support major project works!. Our clients are major players in their fields, and are an excellent way to get your foot in the door within a … more
Posted 3 days ago by Morson Talent
We are looking to recruit a PMO for a 6 month contract position based in Cheshire. You will act as the single point of contact for the project implementation, for all change management and all the workstreams. … more
Posted 05/06/2024 by Morson Talent
Site SHE Manager based in Northwich - Interim 12 month contract. Interim position - 12 month contract. We are seeking an experienced Health, Safety & Environmental professional on an interim basis, to support one of our manufacturing sites in Northwich, Cheshire. You will provide competent and … more
Posted 4 days ago by Apex Resource Management
Are you the Verification and Validation Manager we're looking for. Location: Crewe, UK (Hybrid Working. Contract: Initial 6-month contract (possibility of extension) – Outside IR35. Are you a proven Automotive Engineer, with experience of whole vehicle verification and validation. Do you hold an … more
Posted yesterday by Orion Electrotech
Electrical Technician. Job Location: Crewe. Shifts: Mon - Fri Days (flexibility required. Rates: £26.51 PAYE / £36.81 Umbrella per hour. Start date: ASAP. Orion Rail are looking for an experienced Electrical Technician to be a part of a small technical team within a fast-paced depot environment. As … more
Posted 2 days ago by Ambitek Limited
**THIS ROLE IS LOCATED IN BIRKENHEAD**. Due to new contracts Ambitek are looking to recruit a number of experienced FCAW (Flux Core Welders) to work on a number of shifts in the Merseyside Area. Experienced working in a shipyard would be an advantage as would current coding. Pay Rate £19.22 per … more
Posted a week ago by OLG Recruitment
OLG Recruitment are currently l looking for a Project Engineer / Project Manager to work for a major client based in Crewe. The Candidate will be required full time in the Crewe office, Mon-Fri - 37.5hrs a week (NO WFH). Duration is 6 months. IR35 INSIDE. As Project Manager you will. Manage … more
Posted 03/06/2024 by Ambitek Limited
Our client is looking for experienced Mechanical Fitters (Minimum level 2 NVQ). The role is workshop based in Crewe. This is a long term, on-going contract. Please note pay rates are dependent on experience and whether PAYE or Umbrella for all Mechanical Fitters. Hourly pay rate. DAYS: £17.55 PAYE … more
Posted 2 weeks ago by RHL
The Global Engineering Team is looking for a Project Engineer / Project Manager to join team based in Crewe, Cheshire, for a 6 month plus contract. The successful applicant will manage equipment supply projects from initial design, through procurement, manufacture, inspection and testing, to … more
Posted a week ago by Ford & Stanley Talentwise
Are you looking for the opportunity to work on the maintenance of the brand-new, state of the art, 197 fleet of trains, working for the most complete manufacturer of rail vehicles in the UK market. Ford & Stanley – The Rail Recruitment Experts are recruiting a Technician for a world-class leader in … more
Posted today by Adepto Technical Recruitment Ltd
3D Piping Designer --- Autodesk Plant 3D --- North West --- Minimum 6 month contract --- Outside of IR35. You will be part of a multi-disciplined team responsible for the design of renewable energy projects. Reporting to the CAD Team Leader, you will be responsible for the preparation and … more
Posted 3 days ago by Lanesra Technical Recruitment
Position: Commissioning Engineer - Water. Location: Cheshire. Rate Guide: £400.00 - £420.00 Per Day (Outside IR35. Our client is a Tier 1 D&B Contractor operating predominately in the water industry, who are delivering a number of water and wastewater non-infrastructure projects for Severn Trent … more
Posted 2 days ago by Carrington West
Commissioning Engineer - Clean Water. Location: Peckforton. Rate: Up To £450 per day (Outside IR35/LTD Company. Duration: 24 Months. Sector: Water (Clean. Are you an ambitious Commissioning Engineer looking to elevate your career in the thriving water/Wastewater sector? Join our dynamic team and … more
Posted a week ago by Millbank Holdings
Are you a qualified Planning Engineer looking for a new challenge. Do you have experience in project planning and controls within the oil and gas, petrochemicals, chemicals or renewable energy industries. Are you looking to work for a company that values innovation, sustainability, and inclusivity. … more
Posted 5 days ago by Millbank Holdings
Do you have experience in SAP and PACE. Would you be interested in joining a global leading engineering consultancy at the forefront of a safety first team culture. If you've answered yes, this could be an excellent opportunity for you, so read on for further information and get in touch now to … more
Posted 05/06/2024 by Red Rock Consultants Ltd
Electrical Designer. Red Rock Consultants are currently working with a leading provider of M&E, building services design, installation and maintenance. Due to my client's continuous growth, they are now looking to recruit an experienced Electrical Deisgner to join their expanding team. Contract … more
Posted 05/06/2024 by MDE Consultants Ltd
Panel Wirers x5. Purpose. To carry out the assembly of Electrical components and to comprehensively wire using schematic drawings. Location. Warrington. Principal Accountabilities. To assemble electrical components. To mount electrical components onto metal base plates, using drilling machines, … more
