37

CNC jobs in Sunderland

The position you are looking for is no longer available, but here are some similar jobs that might interest you

  1. Manual Machinist

    Salary:
    £10/annum
    Location:
    Sunderland, Tyne and Wear
    Agency
    CDS Recruitment ltd
    Job Type:
    Permanent

    This is an exciting opportunity for an experienced Manual Machinist to join an establised business. Reporting to the shop floor manager you will be operating a Colchester milling machine or Capstan Lathe, machining components from engineering drawings and too fine tolerances. You will be … more

    Full job Apply Now
    Agency:
    CDS Recruitment ltd
    Posted:
    16/10/2019 (10:27)
    Applications:
    Less than 10
  2. CNC Miller

    Salary:
    £13 - £14/hour
    Location:
    Washington, Sunderland (5 miles)
    Agency
    Ambitek Limited
    Job Type:
    Permanent

    Our client are a medium sized engineering firm who are looking to recruit a experienced CNC miller to join the team on a perm basis. Candidates need to be able to write, set and operate ideally with Hurco controls on a variety of milling machines, however someone who has used other controls who is happy … more

    Full job Apply Now
    Agency:
    Ambitek Limited
    Posted:
    16/10/2019 (10:00)
  3. Manufacturing Engineer - CNC

    Location:
    Washington, Tyne and Wear (5 miles)
    Agency
    Outsource UK Ltd
    Job Type:
    Contract

    … requirement for this ME position is the experience associated with CNC lathes, work holding solutions, tooling and process set-ups. Approximately 70% of the manufacturing is completed on CNC lathes. Key skills required for the Manufacturing Engineer. CNC Machining Knowledge and Experience is essential. Continuous … more

    Full job Apply Now
  4. Training Instructor/ Assessor (CNC/ Manual Machining)

    Salary:
    £27,000 - £34,500/annum neg on experience
    Location:
    Washington, Sunderland (5 miles)
    Agency
    Solutions Recruitment
    Job Type:
    Permanent

    … our training facility in Wearside. The successful applicant is likely to be a time served machinist or toolmaker. You must be proficient in manual and CNC machining (both turning and milling) as well as surface grinding and basic hand fitting techniques. Ideally you will have recent experience in delivering … more

    Full job Apply Now
    Agency:
    Solutions Recruitment
    Posted:
    10/10/2019 (09:04)
    Applications:
    Less than 10
  5. CNC Turner Programmer / Operator

    Salary:
    £18 - £20/hour
    Location:
    Washington, Sunderland (5 miles)
    Agency
    MTrec Ltd
    Job Type:
    Permanent

    … markets they are now looking to recruit CNC Turner Setter / Operator who has experience with Mazatrol. Along with the attractive salary the company also offers the opportunity to work for one of the region's most reputable engineering companies. The Role. CNC Programming, Turning and operating. Working … more

    Full job Apply Now
    Agency:
    MTrec Ltd
    Posted:
    04/10/2019 (13:06)
  6. Toolroom Machinist

    Salary:
    £12.36/hour
    Location:
    Washington, Sunderland (5 miles)
    Agency
    Optimum Recruit Limited
    Job Type:
    Permanent, Temporary

    We are currently looking to recruit on behalf of our client a Toolroom Machinist for a company based in Washington. The ideal candidate must have previous manual machining experience, (milling turning and ideally grinding), ideally have experience of Bridgeport machines. Day shift, potentially a … more

    Full job Apply Now
    Agency:
    Optimum Recruit Limited
    Posted:
    30/09/2019 (14:26)
  7. CNC Machining Centre Operator

    Salary:
    £13.50/hour
    Location:
    Washington (5 miles)
    Agency
    Interaction Recruitment
    Job Type:
    Permanent

    My client is looking to a recruit a CNC Machine Centre Operator with experience of Hurco software. The role will involve programming, setting and operating. Ideal candidate. Must have previous experience. Read engineering drawings. Time served. To take initiative when working alone to set. Write programs … more

    Full job Apply Now
    Agency:
    Interaction Recruitment
    Posted:
    25/09/2019 (15:03)
  8. CNC Operator

    Salary:
    £13.50/hour
    Location:
    Washington, Sunderland (5 miles)
    Agency
    First Choice Recruitment
    Job Type:
    Permanent

    We are pleased to be working with our Engineering client to recruit an experienced CNC Operator for the Washington area. Candidates must have experience with HURCO software, along with being confident and being able to use initiative when working alone to set, write programs and select appropriate tooling … more

    Full job Apply Now
    Agency:
    First Choice Recruitment
    Posted:
    25/09/2019 (14:50)
  9. Toolmaker

    Salary:
    £28,000 - £35,000/annum
    Location:
    Washington, Sunderland (5 miles)
    Agency
    Pin Point Recruitment
    Job Type:
    Permanent

    Toolmaker. Washington. £28,000 - £35,000. Full Time – Permanent. A leading South Tyneside based manufacturing company are on the lookout for an experienced Tool Maker/Mechanical Engineer. Working as part of an already successful team, you will contribute towards the successful refurbishment and … more

    Full job Apply Now
    Agency:
    Pin Point Recruitment
    Posted:
    24/09/2019 (09:02)
  10. Horizontal Borer - Expiring soon!

    Salary:
    £12 - £15/hour Company benefits
    Location:
    Washington, Sunderland (5 miles)
    Agency
    Connectment
    Job Type:
    Permanent

    Horizontal Borer – Washington - £12 to £15ph. Due to continued growth my client are looking for a Horizontal borer to join the team. The successful candidate must be comfortable with conventional machines and be able to work as part of team or … more

    Full job Apply Now
    Agency:
    Connectment
    Posted:
    20/09/2019 - Expiring soon!
  11. Wood Machinist

    Salary:
    £9 - £11/hour
    Location:
    South Shields, South Tyneside (6 miles)
    Agency
    MTrec Ltd
    Job Type:
    Temporary

    MTrec Recruitment are currently recruiting for a prestigious company, who are currently expanding. We are looking for candidates with wood machining and manufacturing experience. The role would see you carrying out general duties; including Machine Operation, construction of wooden products, … more

    Full job Apply Now
    Agency:
    MTrec Ltd
    Posted:
    04/10/2019 (13:09)
  12. CNC Turner - Expiring soon!

    Salary:
    £23,000 - £27,000/annum
    Location:
    South Shields, Tyne and Wear (6 miles)
    Agency
    Alecto Recruitment
    Job Type:
    Permanent

    CNC Turner. Alecto Recruitment is in partnership with an established Manufacturing company based in South Shields who specialise within Precision Engineering. Due to continued growth, our client has an immediate requirement for an experienced CNC Turner to join their existing team. The role. Programming … more

    Full job Apply Now
    Agency:
    Alecto Recruitment
    Posted:
    20/09/2019 - Expiring soon!
  13. Brake Press Operator

    Salary:
    £10.42/hour + Overtime
    Location:
    Hebburn, South Tyneside (7 miles)
    Agency
    Solutions Recruitment
    Job Type:
    Temporary

    Brake Press operator required for a temporary to permanent position (13 weeks) based in Hebburn. Duties. Bending metal to various angles/ degrees, small and big sheets. Reading engineering drawings from hand book for daily requirements. 3 metre and 4 metre machines. Attention to detail a must. … more

    Full job Apply Now
    Agency:
    Solutions Recruitment
    Posted:
    14/10/2019 (09:28)
  14. Brake Press Operator

    Salary:
    £10.42/hour
    Location:
    Hebburn, South Tyneside (7 miles)
    Agency
    Temp Team
    Job Type:
    Permanent

    Our client is currently seeking a Press Brake Operator on a permanent basis. You will be required to set and operate an Amada Press Brake machine, working from engineering drawings and too tolerances of 0.25mm, machining materials such as mild and stainless steel and Aliminium and responsible for … more

    Full job Apply Now
    Agency:
    Temp Team
    Posted:
    01/10/2019 (16:43)
  15. CNC Punch Operator

    Salary:
    £10.42/hour
    Location:
    Hebburn, South Tyneside (7 miles)
    Agency
    Temp Team
    Job Type:
    Permanent

    Our client is currently seeking a CNC Punch Operator on a permanent basis. You will be required to edit programmes, set and operate an Amada Punch machine, working from engineering drawings and too tolerances of 0.25mm, machining materials such as mild and stainless steel and Aliminium and responsible … more

    Full job Apply Now
    Agency:
    Temp Team
    Posted:
    01/10/2019 (16:43)
  16. CNC Brake Press Operator (weekend shift)

    Salary:
    £15.63/hour
    Location:
    Hebburn, South Tyneside (7 miles)
    Agency
    Solutions Recruitment
    Job Type:
    Temporary

    CNC Brake Press operator required for a temporary to permanent position (13 weeks) working a weekend shift, Friday, Saturday and Sunday for a leading metal fabrication company based in Hebburn. Duties. Brake Press. Set machine. Load machine. Reading engineering drawings from hand book for daily requirements … more

    Full job Apply Now
    Agency:
    Solutions Recruitment
    Posted:
    01/10/2019 (10:20)
    Applications:
    Less than 10
  17. CNC Punch Setter/ Operators (weekend shift)

    Salary:
    £15.63/hour
    Location:
    Hebburn, South Tyneside (7 miles)
    Agency
    Solutions Recruitment
    Job Type:
    Temporary

    CNC Punch setter/ operator required for a temporary to permanent position (13 weeks) working a weekend shift, Friday, Saturday and Sunday for a leading metal fabrication company based in Hebburn. Duties. Punch press. Set machine. Load machine. Reading engineering drawings from hand book for daily requirements … more

    Full job Apply Now
    Agency:
    Solutions Recruitment
    Posted:
    01/10/2019 (10:11)
  18. CNC Punch Setter/ Operator - Expiring soon!

    Salary:
    £10.42/hour + Overtime
    Location:
    Hebburn, South Tyneside (7 miles)
    Agency
    Solutions Recruitment
    Job Type:
    Temporary

    CNC Punch setter/ operator required for a temporary to permanent position (13 weeks) based in Hebburn. Duties. Set machine. Load machine. Reading engineering drawings from hand book for daily requirements. Attention to detail a must. Working to tolerances below 1mm. Experience. MUST have past experience … more

    Full job Apply Now
    Agency:
    Solutions Recruitment
    Posted:
    20/09/2019 - Expiring soon!
    Applications:
    Less than 10
  19. CNC Miller - Expiring soon!

    Salary:
    £15 - £16/hour Company benefits
    Location:
    North Shields, Borough of North Tyneside (8 miles)
    Agency
    Connectment
    Job Type:
    Permanent

    CNC Miller / £15.50 / North Shields / Day Shift. Due to growth to the machining team and full order books my client is looking to strengthen with a CNC Miller. Programming with Fanuc controls would be desirable but not a necessity. The company provides high-quality sub-contract precision machining to … more

    Full job Apply Now
    Agency:
    Connectment
    Posted:
    20/09/2019 - Expiring soon!
  20. CNC Turner - Expiring soon!

    Salary:
    £12 - £15/hour Overtime + Company Benefits
    Location:
    North Shields, Borough of North Tyneside (8 miles)
    Agency
    Connectment
    Job Type:
    Permanent

    CNC Turner - £12ph to £15ph Dayshift – North Shields. Due to continued growth and full order books my client is looking to strengthen there machine shop with multiple CNC Millers and Turners. Programmer set and operate a range of CNC Machining centres with a range of control systems that are all Fanuc … more

    Full job Apply Now
    Agency:
    Connectment
    Posted:
    20/09/2019 - Expiring soon!
  21. Manual Miller

    Salary:
    £15/hour
    Location:
    NE10, Felling, Gateshead (8 miles)
    Agency
    First Choice Recruitment
    Job Type:
    Permanent

    Our client has 25 years experience working on projects for a number of leading products including Black and Decker power tools, Compaq computers, packaged cheeses, and Hugo Boss perfumes. They are looking for a Manual Miller to start work asap at their busy manufacturing plant in Felling. Monday to … more

    Full job Apply Now
    Agency:
    First Choice Recruitment
    Posted:
    04/10/2019 (15:24)
  22. CNC Milling Machinist

    Salary:
    £14/hour
    Location:
    Chester-le-Street, County Durham (8 miles)
    Agency
    Solutions Recruitment
    Job Type:
    Permanent

    … business. Independently owned and operated, there will be genuine chances of career advancement for the right person. Successful applicant will be a CNC MILLING MACHINIST, but in addition with the ability to set and programme. You do not necessarily need to be time-served, but must have good setting, … more

    Full job Apply Now
    Agency:
    Solutions Recruitment
    Posted:
    03/10/2019 (17:00)
  23. Punch Press Operative

    Salary:
    £9 - £10/hour
    Location:
    Wallsend, Borough of North Tyneside (8 miles)
    Agency
    MTrec Ltd
    Job Type:
    Permanent

    MTrec Recruitment are currently recruiting for a prestigious company who are well known within the local area. We are looking for candidates with punch press experience. The role would see you carrying out general duties; including Pressing, basic Quality Inspection, cutting, and potential heavy … more

    Full job Apply Now
    Agency:
    MTrec Ltd
    Posted:
    29/09/2019 (09:08)
  24. CNC Turner (Programmer, Setter , Operator) - Expiring soon!

    Salary:
    £12 - £16/hour
    Location:
    Wallsend (8 miles)
    Agency
    Interaction Recruitment
    Job Type:
    Permanent

    My client is looking to recruit CNC Turner on a temp to perm basis. This role will involve programming, setting and operating. Programs – Siemen controls. Must be time served. Dayshift only. Hourly rate subject to experience. … more

    Full job Apply Now
    Agency:
    Interaction Recruitment
    Posted:
    20/09/2019 - Expiring soon!
  25. EDM Machinist

    Salary:
    £14 - £20/hour Negotiable on experience
    Location:
    Gateshead, Tyne & Wear (9 miles)
    Agency
    Contek Recruitment Solutions Ltd
    Job Type:
    Permanent

    EDM Machinist - Gateshead. Contek Recruitment are working with a well-established Aerospace/sub-sea Engineering company, who are seeking an experienced Wire/Spark Eroder to join their team in Gateshead. Well skilled Setter Operators will also be considered. Reporting to - The Production Manager / … more

    Full job Apply Now
    Agency:
    Contek Recruitment Solutions Ltd
    Posted:
    16/10/2019 (16:38)
    Applications:
    Less than 10